{i} This page was converted from Confluence at 17.08.2014 20:49:14. The formatting may be broken. Internal links are most likely broken. If you have reviewed this page and the formatting & links are ok, you can remove this information.
----
{{{#!wiki important

Obwohl das Projekt schon recht weit fortgeschritten ist, ist diese Wiki-Seite doch recht mager. Kommt am besten direkt im Space vorbei und/oder fragt [[../Sebastian Setz|Sebastian Setz]] oder [[Florian|Florian]]
}}}

{{{#!wiki important

Projekt der Woche

Hier gibt es einen schönen Blog Beitrag über dieses Projekt: 
[[http://www.kreativitaet-trifft-technik.de/2012/02/projekt-styroschneider|http://www.kreativitaet-trifft-technik.de/2012/02/projekt-styroschneider]]
}}}

Bilder und Videos:

[[http://www.kreativitaet-trifft-technik.de/tags/styroschneider|http://www.kreativitaet-trifft-technik.de/tags/styroschneider]]

[[http://www.kreativitaet-trifft-technik.de/2012/03/images-space-17032012|http://www.kreativitaet-trifft-technik.de/2012/03/images-space-17032012]]

[[http://www.kreativitaet-trifft-technik.de/2012/03/images-space-13032012|http://www.kreativitaet-trifft-technik.de/2012/03/images-space-13032012]]

[[http://www.kreativitaet-trifft-technik.de/2012/03/images-space-08032012|http://www.kreativitaet-trifft-technik.de/2012/03/images-space-08032012]]



Idee:

Forum: [[http://www.rc-network.de/forum/showthread.php/143987-Styroschneider-nach-Konzept-Hans23-mit-EMC2/page99|http://www.rc-network.de/forum/showthread.php/143987-Styroschneider-nach-Konzept-Hans23-mit-EMC2]]

Website: [[http://www.cnc-hotwire.de/|http://www.cnc-hotwire.de/]]



Schrittmotoren:

[[http://www.pollin.de/shop/dt/NTQ2OTg2OTk-/Motoren/Schrittmotoren/Schrittmotor_HOWARD_IND_1_19_4201.html|http://www.pollin.de/shop/dt/NTQ2OTg2OTk-/Motoren/Schrittmotoren/Schrittmotor_HOWARD_IND_1_19_4201.html]]



Belegung:

[[http://www.cnc-hotwire.de/content/Tipps+Tricks.html|http://www.cnc-hotwire.de/content/Tipps+Tricks.html]]

Beitrag: „15.11.2010 … und er dreht sich doch!“



Motortreiber:

[[http://www.watterott.com/de/Quadstepper-Motor-Driver-Board|http://www.watterott.com/de/Quadstepper-Motor-Driver-Board]]

[[http://www.watterott.com/de/Pololu-A4983-Schrittmotortreiber|http://www.watterott.com/de/Pololu-A4983-Schrittmotortreiber]]



Eigene Platine:

Warenkorb Reichelt: [[https://secure.reichelt.de/index.html?;ACTION=20;LA=5010;AWKID=557073;PROVID=2084|https://secure.reichelt.de/index.html?;ACTION=20;LA=5010;AWKID=557073;PROVID=2084]]

Inspiration: [[http://reprap.org/wiki/Sanguinololu|http://reprap.org/wiki/Sanguinololu]]
Scheidvorlagen:
[[http://ultralajt.webs.com/freeplans.htm|http://ultralajt.webs.com/freeplans.htm]]
[[http://www.mbg-pizsol.ch/modelle/Eigenkonstr.html|http://www.mbg-pizsol.ch/modelle/Eigenkonstr.html]]
Verbesserungen für V0.2

 * 7805
 * kein SMD
 * Stecker für Spannungsversorgung besser platzieren
 * keine LEDs für Status



G-Code:

Inkscape Plugin: [[http://www.cnc-club.ru/forum/viewtopic.php?t=35|http://www.cnc-club.ru/forum/viewtopic.php?t=35]]

gcode Betrachter: [[http://sourceforge.net/projects/xincnc/|http://sourceforge.net/projects/xincnc/]]

gcode Software: [[http://www.aeropassion.net/jedicut/jedicut2-en-001.php|http://www.aeropassion.net/jedicut/jedicut2-en-001.php]]

[[http://www.cnc-hotwire.de/content/Programmdateien.html|http://www.cnc-hotwire.de/content/Programmdateien.html]]

[[http://www.bocnc.de/|http://www.bocnc.de/]]